Clover Technologies Group PAC0820 Instrukcja Obsługi Pobierz pdf (Strona 61)

- 61 -

【Delete User】SelectauserandClick this Delete User to delete it.

5.4.6 PTZ Setting

You can configure PTZ parameters in this interface: Main Menu>> Setting>> PTZ

Setting

【Channel】Select the camera (channel) number whose settings you want to modify.

【Protocol】Select the PTZ device protocol. It must be consistent with the protocol

of the actual PTZ cameras installed. You can choose between: Pelco-D,

Pelco-P, Panasonic, Samsung, SONY...etc. The changes will take effect

after you save and exit.

【Address】Select the PTZ address. It must be consistent with the address of the

actual PTZ cameras installed. Choose any number from 1 to 255. Please

note that this is not the same as the number of the channel to which you

hook up the PTZ camera in your DVR system.

【Baud rate】Select the PTZ device baud rate. It must be consistent with the baud

rate of the actual PTZ cameras installed. You system supports eight

options: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.

【Data Bits】Options include 5, 6, 7 and 8.The default setting for DATA BIT is 8.

【Stop Bits】Options include 1 and 2. The default setting is 1.

【Parity】Options include None, Odd, Even, Mark and Space. Default setting is

None.

Note: When making changes to PTZ camera functionality /

settings, make sure that these changes are being made to actual

PTZ cameras by selecting the correct number in the previous

field

(

Camera Channel

)

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 102 103

Brak uwag

Clover Technologies Group PAC0820 Instrukcja Obsługi Strona 61